How To Lay Down Sod Youtube

Lay out the sod in a staggered pattern. Pat sod carefully into place, so there aren’t any air pockets between soil and sod.

How to install HydroBlox (With images) Installation, Diy

Another useful tool that the name of slips my old mined right now has a handle a little longer than an ax but the blade is curved and the cutting edge is on the bottom.

How to lay down sod youtube. You’ll want your sod to rest about an inch below any hardscapes like walkways or sidewalks, so take that into consideration as you grade your surface. In this video, this old house landscape contractor roger cook helps a homeowner lay sod in his backyard. Simply walk along and cut along the edge.

You can then use a hatchet to cut the outline. Tuck or roll the seams together for. Lay the sod, roots down, and water again.

This presses down the sod to ensure good root contact with the soil before watering. After you’ve laid the first row, smooth out any areas that have wrinkled or bunched up. Fill a lawn roller ¾ full of water and walk it over the entire sod.

Using a straight edge in your yard, unroll the first row of sod. Once you’re satisfied that the sod is in good condition, spray it down well using a hose equipped with a nozzle attachment set to mist. In the spot you want your garden to be, lay the sod grass down and cover it with several inches (10 to 15 cm.) of good soil.

Fit the sod as close together as possible and don’t overlap the edges. Unroll the first roll of sod against the longest edge of surrounding landscaping or concrete, making sure the entire length makes contact with the soil below it. Avoid walking on the sod as you lay it, and rake out any footprints you make in soil as you go.

Step 4 water the newly laid sod. Firmly press the sod into place. Work to smooth out any wrinkles in the sod.

Unroll the sod down the row, starting a new roll as needed. Moisten the soil lightly with a garden hose, and place the open end of the roll of sod where you started prepping the area. If you don’t need new sod anywhere, you can use it as a good base for garden beds.

Trim sod to fit the area using sod cutters were needed. In most cases it won't be necessary to add too much extra dirt, but the little bit of compost will help give some nutrients to the roots while your new grass becomes established To install sod on an existing lawn, cut any existing grass low, and level out any holes or step dips in the yard.

Try following the line of your patio, driveway or fence to keep the edges straight and even. Place the old grass into a. Use a soil probe to check the depth and texture of the topsoil.

Work with whole pieces, laying them one at a time, end to end. Lay sod over the tree roots, on top of the soil. Lay the sod start by dampening the soil with a sprinkler or hose, then rake out any footprints you’ve left behind.

How to hold sod in place on a hill. Keep the area thoroughly watered and avoid stepping on the sod for about 2 weeks to allow it to take root. Lay out one line of sod along the edge of your lawn, placing the sod end to end.

Layout the sod so it overlaps the bed. Bring in a top soil/ compost mix and spread it evenly through the yard. When you start work, it’s a good idea to moisten both the roll of sod you’re preparing to lay, and the strip of soil the sod’s going on top of.

Take care that the sod is smooth and flat with no gaps. Rake the soil as you lay the sod to clear any bumps under the surface. If the sod needs to be cut to size, do so with a sod cutter or a utility knife, making sure to cut through the roots of the sod.

Start the next line of sod staggered with the first, as though you were laying down a line of bricks. If you are installing your new lawn on a slope, use stakes to hold sod in place.

Video Demo Walk behind compost spreader for topdressing